BeyondERP.Newsletter
Menu

Setup step on the Product information management parameters page · Product information management

Set up Product information management parameters

Use this page to control how products are identified and validated across the module, and to maintain its constraint-based product configuration, number sequence and product attribute settings.

Used by
Product designer, Product design manager, Product engineering manager and 2 more roles
Business process
Develop product strategy
Menu item
EcoResProductParameters
Main table
EcoResProductParameters
Data entity
EcoResConstraintBasedProductConfigurationModelParametersEntity
Setup steps
1 on this page
Show what matters for
SETUP GUIDEHow to set it up8 sections. Choose a role to highlight what matters to you.
Everyone

1What it is and why

What it isA setup page where you set the general parameters for Product information management, such as product identification, validation of default order quantities and engineering versions.
What you do hereUse this page to control how products are identified and validated across the module, and to maintain its constraint-based product configuration, number sequence and product attribute settings.
Product information management parameters page in Dynamics 365
The page in Dynamics 365. page title tab to open what to set or check
Functional consultant · Solution architect

2Where it fits

Business processDevelop product strategy
Menu pathProduct information management › Setup › Product information management parameters
Used next byProduct entity identifier codes Microsoft Learn
In this process Set up Hazardous material classification group · Set up Warranty settings
End user · Functional consultant

3How to do it

About the examples: Examples and screenshots in this guide use BEAT, a demo company in a Dynamics 365 test environment. Use your own company's codes and values instead of copying them.

Setup steps on this page

Set up Product information management parameters

Use this page to control how products are identified and validated across the module, and to maintain its constraint-based product configuration, number sequence and product attribute settings.

How to use it

  1. Go to Product information management > Setup > Product information management parameters.
  2. On the General tab, set Show product numbers on forms, Validation on default order quantities and Allow invalid versions.
  3. Open the Constraint-Based product configuration models, Number sequences, Shared number sequences and Product attributes tabs to review the related settings.
  4. Select Save.

Source: Checked in Dynamics 365

Fields on the page

FieldWhat it meansTable column
Validation on default order quantitiesStrict requires every Standard order quantity in the default order settings to be a multiple of the Multiple value. Standard uses standard validation.Microsoft Learn DefaultOrderQuantitiesValidation
Product attributesOn this tab you select the master company where the product and item identifiers are primarily maintained.Microsoft Learn

Test checklist

  1. Set Validation on default order quantities to Strict
  2. Open Default order settings for a product and set Multiple 5 and Standard order quantity 12 on the Purchase order FastTab
  3. Check the save is refused with an error in the message bar
  4. Change the standard quantity to 10 and check it saves

Source: Microsoft Learn

Functional consultant

4Setup decisions

Setup stepRecommended value and whyDecision, common mistake and test
Set up Product information management parametersShould default order quantities be validated strictly?Turning on Strict validation without checking existing data: you can no longer save default order settings whose standard order quantity isn't a multiple of the Multiple value.

Number sequences

ReferenceShared or per companyNote
Item - barcode associationPer companyBEAT uses number sequence Prod_43. Checked in Dynamics 365
Solution architect

5Design impact

Can it be undoneReversible: Validation on default order quantities can be switched between Strict and Standard; it's checked when default order settings are saved.
Technical architect

6Technical

Menu itemEcoResProductParameters Checked in Dynamics 365
FormEcoResProductParameters Checked in Dynamics 365
TableEcoResProductParametersShown as “PRODUCT PARAMETERS” in Record infoChecked in Dynamics 365
Data entitiesEcoResConstraintBasedProductConfigurationModelParametersEntityConstraint-based product configuration model parameters Microsoft data model EcoResProductParametersEntityProduct parameters Microsoft data model
Who can open itPrivilegesManage product parameters EcoResProductParametersMaintainView product parameters EcoResProductParametersViewDutiesInquire into product management policies EcoResProductManagementPoliciesInquireEnable the product management process EcoResProductManagementProcessEnableEnable the engineering change management process EngChgEngineeringChangeManagementProcessEnableEnable product configuration modeling process PCProductConfigurationModelProcessEnablInquire into product configuration reference data PCProductConfigurationRefDataInquire
5 security rolesProduct designer BOMProductDesignerProduct design manager BOMProductDesignManagerProduct engineering manager EngChgProductEngineeringManagerInventory accountant InventCostAccountantInventory accountant clerk InventCostCostClerk
Checked in Dynamics 365
Roles to set it up and use itTo set it up or change itProduct design manager BOMProductDesignManagerProduct engineering manager EngChgProductEngineeringManagerTo use itProduct designer BOMProductDesignerInventory accountant InventCostAccountantInventory accountant clerk InventCostCostClerkGive people one of these roles. On this system, 5 roles can open this page.Checked in Dynamics 365
Developer

7Developer

Open it by URLhttps://<your-environment>/?mi=EcoResProductParameters
Integrate withEcoResConstraintBasedProductConfigurationModelParametersEntity data entity Microsoft data model
Data migrationEcoResConstraintBasedProductConfigurationModelParametersEntity (Constraint-based product configuration model parameters): shared by all companies, in Microsoft's default template 300 - Inventory.EcoResProductParametersEntity (Product parameters): shared by all companies, in Microsoft's default template 300 - Inventory.Load order: Microsoft's default template 300 - Inventory loads Constraint-based product configuration model parameters at execution unit 1, level 300, sequence 90. Lower levels load first, and entities at the same level load in sequence order.Load first: the default templates at lower levels (System setup to Budgeting)Microsoft Learn
Table definitionEcoResProductParameters columns and relations Microsoft data model
Everyone

8Sources

To cite this step: PIM-SETUP-020, Set up Product information management parameters. Beyond ERP Atlas Hub, 2026-11-11. https://www.beyonderp.cloud/atlas/step/PIM-SETUP-020